Ex Aluminium Junction Box Enclosure | IECEx ATEX Ex eb tb
Ex Aluminium Junction Box Enclosure | IECEx ATEX Ex eb tb
Couldn't load pickup availability
89 in Stock Ready to Ship
The EJE-R enclosure series offers excellent performance design and meets the stricter requirements of hazardous areas. EJE-R series junction boxes are made from aluminium alloy and given an electrostatically applied polyester coating containing stainless steel particles, then baked at 200°C. This enables UV and thermal stability, providing mechanical impact resistance and excellent resistance when exposed either to salt mist or to marine and other damp environments. Perfect for industrial use.
Compliant to ATEX and IECEx according to EN 60079. EJE-R enclosure series are usually installed in industrial plants where there is a risk of explosion and fire, classified
as Zone Gas 1, 2 and Dust 21, 22; they are mainly used as junction boxes or for routing cables for analogue or digital signals and for control and monitoring associated with equipment such as motors, pumps, transmitters, sensors, end cables collecting, junction etc.
SKU Model: EJE-R
Collapsible content
Technical Data
Guarantee
We aim to provide you with the best quality products, if for an unfortunate product defect we have a 14 day money back return guarantee.
Warranty
• 1 year warranty from the date of purchase.
• Invoice or shipment bill is required to claim the warranty.
• The warranty policy only requires manufacturer to repair the defective product or send substitute for replacement.
• Installation labour, electricity cost and other related cost will not be covered by the manufacturer warranty policy.
• Warranty doesn't cover the defect caused by inappropriate use, especially if directions of the instructions for use are not observed, normal abrasion as well as failures which affect the value or use of the product insignificantly.
Please see our returns policy for more information.
-
Hazardous Area Certified
Certification
- IECEX: CML IECEx 17.0023X
- ATEX: CML17 ATEX 3038X
Zone Location
- Ex eb db IIC T6
- Extb IIIC T80°C
-
Electrical Safety Certified
- Weather Protection: IP66
- Impact Rating: IK10 / 7 Joule
- Ambient Rating: -60~+65°C
- Gas Zones 1&2, Dust Zones 21&22
-
Construction
- Body & Lid: Aluminium, die or shell casting. RAL 7001, silver grey finish.
- Gasket: Acid, hydrocarbon and high temperature-resistant silicone, located between body and lid.
- Mounting: 4 holes for M4 to M6 screw
Accessories available on request special requests
NOTE: Only use cable glands that meet ATEX, IECEx directive requirements. Use gaskets and lock nuts on entries to ensure IP66 protection.
- Internal anti-condensation coating RAL 2004 (pure orange)
- External polyester coating in different colour (specify the RAL number)
- Breather valve; Drain valve
- Internal mounting plate: stainless steel
- Earth screws in stainless steel
- Terminal block mounting rails
- Flexible earthing and built-in component options.
-
Pre & Post After Sales Support
After Sales Support
We offer after sales support on all our products including
- Installation
- Configuration
- Maintenance
- Repair
- Calibration
-
Calibration & Repair
Calibration ServicesOur accredited laboratory is tailored to conduct traceable standard calibrations and repairs on all our equipment.
